Access Control Installation

Guide · Businesses · 4 min read · Updated 17 November 2026

Access Control Rules in the UK: Fire Safety and GDPR Explained

Short answer

Access control must never stop people escaping in a fire. Doors on escape routes need a reliable way to open without a key, such as push bars, exit buttons and emergency release units, and locks linked to the fire alarm should release when it activates, as covered by BS 7273-4. Systems that log entries or use biometrics process personal data, so UK GDPR and the Data Protection Act 2018 apply.

Access Control Rules in the UK: Fire Safety and GDPR Explained

Why fire safety comes first

An access control system is designed to keep people out. A fire escape route is designed to let people out quickly. When the two meet on the same door, escape must always win. Approved Document B in England sets out guidance on means of escape, and fire safety law places duties on the responsible person for non-domestic premises to keep escape routes usable. In England and Wales this is the Regulatory Reform (Fire Safety) Order 2005, and in Scotland the Fire (Scotland) Act 2005 applies.

In practice, that means any electrically locked door on an escape route needs a dependable way to open from the inside, even if power fails or the system develops a fault. Your fire risk assessment should consider controlled doors.

How doors on escape routes are made safe

The approach depends on the lock type and the door's role. Magnetic locks are fail-safe: they release when power is removed. Exit is usually by a request-to-exit button or sensor, backed up by an emergency door release unit, often a green break-glass style box, that cuts power to the lock directly. Electric strikes and mortice locks can be fail-safe or fail-secure, and fail-secure devices on escape routes need mechanical free exit, such as a handle or push bar that always opens the door from inside.

Panic and emergency exit hardware on escape doors is covered by BS EN 1125 for push bars and BS EN 179 for lever handles. Access control needs to be coordinated with this hardware, not fitted against it.

  • Free exit from inside on every escape route door
  • Emergency door release unit beside electrically locked exits
  • Fail-safe locks released by the fire alarm where required
  • Exit hardware that suits the occupants and the risk
  • Regular testing recorded in the fire safety log

Fire alarm integration and BS 7273-4

Where locked doors must release when the fire alarm sounds, the link between the fire alarm and the lock is covered by BS 7273-4. This standard sets out how the actuation of release mechanisms should work, including the reliability of the connection and categories based on the risk. Typical examples are maglocks on stairwell doors or main entrances that drop out when the alarm activates.

The installer and the fire alarm engineer need to work together, so the interface is wired and tested correctly and failure of the link does not leave doors locked. Test the release as part of routine fire alarm testing.

Rule or standardWhat it covers
Approved Document B (England)Guidance on means of escape in buildings
Regulatory Reform (Fire Safety) Order 2005Fire safety duties in non-domestic premises, England and Wales
Fire (Scotland) Act 2005Fire safety duties in Scotland
BS 7273-4Actuation of door release mechanisms linked to fire alarms
BS EN 1125 and BS EN 179Panic and emergency exit hardware
BS EN 60839-11-1Electronic access control system and component requirements

Data protection: entry logs and personal data

Networked access control records who opened which door and when. Those logs identify individuals, so they are personal data, and the organisation running the system must comply with UK GDPR and the Data Protection Act 2018. That means having a lawful basis, telling staff and other users what is recorded and why, keeping logs secure, limiting who can view them and setting a sensible retention period rather than keeping everything forever.

If logs are used to monitor working hours or behaviour, staff should be told clearly. The Information Commissioner's Office publishes guidance on monitoring workers that is worth reading before using access data in this way.

Biometrics and CCTV links

Biometric readers process special category data, which needs both a lawful basis and an additional condition, and a data protection impact assessment is generally expected. Organisations should usually offer an alternative to people who do not want to use biometrics, and protect stored templates carefully.

Many systems link door events to CCTV, so footage of each entry is tagged. This is useful for investigations but adds more personal data. Treat camera footage with the same care: clear signage, defined retention, controlled access and a process for responding to requests from people who want to see data held about them.

Product and installation standards

BS EN 60839-11-1 is the European standard for electronic access control systems, setting system and component requirements that installers and manufacturers can work to, including security grading. It is not a legal requirement for every site, but specifying equipment and design to a recognised standard helps make sure the system matches the risk.

Wiring for locks, controllers and power supplies should follow BS 7671, and fire door hardware must not compromise the door's certified fire performance. Ask the installer how they will cut and fit hardware into fire doors and how they will record the work.

A simple compliance checklist

Before going live, walk every controlled door with your installer and fire risk assessor. Confirm that each can be opened from inside without a key or credential, that emergency release units work, and that fire alarm activation releases the right doors. Update your fire risk assessment and fire safety log. On the data side, update your privacy notice, decide retention periods for logs and footage, restrict admin access and record the decisions. Repeat the door tests regularly and after any changes to the system or building.

Questions people also ask

Can I put a maglock on a fire exit?

It is possible, but the door must still allow free and immediate exit. That usually means a request-to-exit device, an emergency door release unit that cuts power to the lock, and release on fire alarm activation where required, designed in line with BS 7273-4. Your fire risk assessment should cover the door.

How long should access control logs be kept?

UK GDPR does not set a fixed period. You should keep logs only as long as needed for the purpose, such as security investigations, and set and document a retention period that you can justify. Many organisations choose a period of weeks or months rather than keeping logs indefinitely.

Do access-controlled doors need to release in a power cut?

Doors on escape routes must always allow exit from inside, power or no power. Fail-safe locks such as maglocks release when power is lost. Fail-secure locks on escape routes need mechanical free exit from inside. Non-escape doors can stay locked in a power cut if that suits the security need.

Written and checked by the Access Control Installation team. Read our editorial policy.

Get a free access control installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote