Guide · Businesses · 3 min read · Updated 17 November 2026
How to Choose an Access Control Installer: What to Check
Short answer
Choose an access control installer who surveys every door, understands fire exits and fire alarm integration, specifies locks that suit each door, explains the software and credential technology, carries insurance and offers clear support and maintenance terms. The quote should break down costs by door, show any subscription separately and include commissioning, training and handover documentation.
Why installer choice matters
Access control combines locks, doors, electronics, networks, software and fire safety. A system that looks impressive on paper can still fail in practice if a door does not close properly, a lock is wrong for the frame, or the fire alarm link is not tested. Many problems that sites experience come from poor design and installation rather than faulty products.
A good installer looks at the whole picture: how people move around the building, which doors are escape routes, how the doors are built, what network is available and who will manage the system day to day.
It is worth asking for examples of similar sites the installer has worked on, such as offices, schools or residential blocks, and how they handled fire exits there.
What a proper survey covers
A thorough survey visits every door to be controlled and records its construction, frame, existing hardware, closer, swing direction and whether it is a fire door or on an escape route. The surveyor checks where controllers and power supplies can sit, how cables will reach each door and whether a network connection is available. They should ask about users, opening hours, visitors, deliveries, and how the system will be managed.
If an installer quotes without visiting, or without asking about escape routes, treat the price with caution. Door hardware and fire integration are where costs and risks often hide.
- Construction and condition of every controlled door
- Escape routes and fire door status
- Existing locks, closers and exit hardware
- Cable routes, power and network
- Users, schedules, visitors and administrators
What the quote should include
A good quote is broken down by door, naming the reader, lock or strike, exit device, emergency release and any door work such as new closers. It should state the controller and software, the credential technology, the number of credentials included and any licences. Cloud subscriptions should be shown separately with the term and price. Integration with fire alarms, CCTV or intercoms should be spelled out, including who is responsible for the fire alarm side.
Commissioning, staff training, as-fitted documentation and handover should be listed, along with warranty and maintenance terms.
| Quote item | Why it matters |
|---|---|
| Hardware per door | Lets you compare like with like |
| Credential type | Encrypted credentials are harder to copy |
| Software and licences | Avoids surprise costs when adding users or doors |
| Subscription terms | Shows the true cost over several years |
| Fire alarm integration | Clarifies who wires and tests the release |
| Commissioning and training | Makes sure the system works and staff can run it |
Technical questions to ask
Ask whether the system is open or proprietary. Some systems only work with one manufacturer's readers and support from approved dealers, which can lock you in. Ask whether readers support encrypted credentials and mobile access. Ask how software updates and backups are handled, and whether the system can be managed by more than one administrator with different permission levels.
On networked systems, ask how the controllers and software are secured on your network, including default passwords, updates and remote access. A connected access control system is part of your IT estate and should be treated that way.
Support and maintenance
Locks wear, closers drift, batteries in wireless locks run down and readers get knocked. Ask what support the installer offers after handover, how faults are reported and how quickly they respond. Planned maintenance, from about £150 per visit for smaller systems, typically covers testing every door, checking backup batteries, adjusting closers and confirming fire alarm releases still work.
Find out who holds the master administrator access and make sure your organisation keeps control of it, so you are not dependent on one installer to add users or retrieve logs.
Red flags
Be wary of installers who suggest fitting a lock to a fire exit without discussing free exit and emergency release, who are vague about subscription costs, who will not name the products they intend to use, or who keep administrator passwords to themselves. Another warning sign is a system proposed on doors that do not close properly, without addressing the closer or the door itself. A controlled door that does not shut reliably is not secure, however good the reader.
Also be cautious if the quote relies entirely on wireless locks without discussing battery life and replacement, or if the installer cannot explain how the system behaves in a power cut. Every controlled door should have a clear answer to two questions: how do people get out in an emergency, and what happens when the power fails? If the answers are vague, ask for them in writing before agreeing to go ahead.
At handover
Walk each door with the installer and test entry, exit, emergency release and fire alarm release. Make sure administrators have been trained to add and remove users, change schedules and export logs. Collect as-fitted drawings, a list of doors and hardware, software login details for your administrators, warranty information and the maintenance plan. Update your fire risk assessment and data protection records, and agree a date for the first maintenance visit.
Questions people also ask
What is the difference between open and proprietary access control?
Open systems work with hardware and credentials from several manufacturers and can be supported by many installers. Proprietary systems use one manufacturer's components and are often serviced only by approved dealers. Proprietary systems can work well, but check long-term costs and support before committing.
Should the installer keep the administrator password?
No. Your organisation should hold master administrator access and control who else has it. The installer may have a separate engineer login for support. Keeping control of administrator access means you can manage users and logs yourself and change installer if needed.
How often should access control be maintained?
Most sites benefit from at least one planned maintenance visit a year, with more for large or heavily used systems. Visits typically test every door, check backup batteries and power supplies, adjust door closers and confirm fire alarm releases. Maintenance visits start from about £150.
Written and checked by the Access Control Installation team. Read our editorial policy.
More guides
How Much Does an Access Control System Cost in the UK?
A standalone keypad or reader on one door typically costs £450–£900 fitted in the UK. Networked fob or card access usually runs £900–£1,800 per door,…
Fob vs Keypad vs Mobile vs Biometric Access Control
Keypads are cheapest but codes are easily shared. Fobs and cards are the everyday standard, easy to issue and cancel, but can be lost or, in older…
Access Control Rules in the UK: Fire Safety and GDPR Explained
Access control must never stop people escaping in a fire. Doors on escape routes need a reliable way to open without a key, such as push bars, exit…
Door Entry Systems for Flats: A Guide for Landlords and Managers
A door entry system for flats links a panel at the main entrance to a handset, video screen or app in each flat, so residents can see or speak to…
Get a free access control installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote