Access Control Installation

Guide · Businesses · 4 min read · Updated 17 November 2026

How Much Does an Access Control System Cost in the UK?

Short answer

A standalone keypad or reader on one door typically costs £450–£900 fitted in the UK. Networked fob or card access usually runs £900–£1,800 per door, and cloud-managed systems £1,000–£2,000 per door plus a subscription. Video door entry for a small block of up to around 12 flats costs £2,500–£6,000, gate access control £700–£2,500, and maintenance visits start from about £150.

How Much Does an Access Control System Cost in the UK?

Guide prices for access control

Access control is priced mainly per door, because each controlled door needs its own reader, locking device, exit device, cabling and share of a controller and power supply. The type of system then sets the level: a standalone keypad is self-contained, while networked and cloud systems link every door to central software so users can be added, removed and audited in one place. The figures below are realistic 2026 guide prices for supply, installation and commissioning on typical UK premises.

Unusual doors, long cable runs, listed buildings and integration with fire alarms or CCTV can push costs above these ranges.

System or jobGuide priceWhat is included
Standalone keypad or reader£450–£900Single door, electric lock, exit button, power supply
Networked fob or card access£900–£1,800 per doorReader, lock, controller share, cabling, software setup
Cloud-managed access control£1,000–£2,000 per doorInstalled hardware; subscription usually separate
Video door entry, small block£2,500–£6,000Entrance panel, door release, indoor units, up to around 12 flats
Gate access control£700–£2,500Keypad, reader or intercom on a post to an existing gate
Maintenance visitfrom £150Testing, battery checks, minor adjustments

What changes the price per door

The locking hardware is a major variable. A surface-mounted magnetic lock on a standard internal door is quick to fit, while an electric mortice lock or concealed strike on a fire door takes longer and must preserve the door's fire performance. Glass doors need special brackets or floor locks. Double doors may need a lock on each leaf, and exit devices such as push bars must be coordinated with the access hardware.

Cabling is the next factor. Running cable through suspended ceilings in an open-plan office is straightforward. Chasing walls in a finished reception, crossing a car park to a gate or working in a listed building takes much longer. Wireless locks can reduce cabling but cost more per lock.

  • Type of lock: maglock, electric strike, electric mortice or wireless lock
  • Door type: timber, glass, metal, fire door or double doors
  • Cable routes and building fabric
  • Readers: fob, card, keypad, mobile, biometric or combined
  • Integration with fire alarm, CCTV, intercom or visitor systems

Upfront versus ongoing costs

Traditional on-premises systems are mostly an upfront cost: hardware, installation and software licences, then occasional maintenance and fob replacements. Cloud-managed systems often have a lower or similar hardware cost but add a monthly or annual subscription per door or per user, which pays for remote management, mobile credentials and software updates. Over several years, the subscription can add up, so compare the total cost over the period you expect to use the system.

Credentials themselves carry a cost. Fobs and cards are cheap individually but add up across many staff or residents. Mobile credentials may be charged per user. Factor in replacements for lost fobs.

Example budgets for common sites

A small office with one main entrance might choose a single networked fob door with a video intercom, landing typically in the region of £1,500–£3,000 depending on hardware. A business with a front door, a rear fire exit with controlled re-entry, and a server room might need three controlled doors at £900–£1,800 each, plus integration with the fire alarm. A block of flats might combine a video door entry panel with fob access on the main and bin store doors.

These examples are guides only. A survey is the only way to confirm door hardware, cable routes and integrations, which together decide the final figure.

SiteLikely setupIndicative budget
Small office, one entranceOne networked fob door plus intercomAround £1,500–£3,000
Small business, three doorsThree networked doors with fire alarm link£2,700–£5,400 plus integration
Block of up to 12 flatsVideo door entry plus fob on main door£2,500–£6,000 upwards
Gated driveway or yardKeypad or intercom on post to gate£700–£2,500

Upgrading an existing system

If you already have access control, an upgrade can be cheaper than starting again. Many modern controllers work with existing locks, exit buttons and cabling, and readers can often be swapped for newer models that accept both fobs and mobile credentials. Older proximity fobs that are easy to copy can be replaced with encrypted credentials while keeping much of the infrastructure.

An installer should audit what you have, check that locks and power supplies are in good order and that fire alarm links still release doors correctly, before recommending what to keep and what to replace.

Costs that are easy to miss

Door work is the most commonly overlooked cost. If a door does not close firmly against its frame, no lock will secure it, so a new or adjusted closer is often needed. Old timber doors may need repairs before a lock can be fitted, and glass doors can need specialist brackets. Fire doors must keep their fire performance, which may require certified hardware and intumescent protection around any cut-outs.

Other extras include network points for controllers, extra power supplies with backup batteries, links to the fire alarm carried out by the fire alarm engineer, and making good decoration after cabling. Ask whether these are included in the quote or priced separately, so the final bill matches the figure you budgeted for.

How to get an accurate quote

List every door you want to control, how many users there are, and who needs access where and when. Note door types, existing locks and any fire exits on the route. Photograph each door from both sides, including the frame and any existing hardware. Say whether you want remote management, mobile credentials, visitor access or links to CCTV and the fire alarm. A site survey then confirms cabling routes, power and hardware, and should result in a written quote broken down by door, with any subscription shown separately.

Questions people also ask

How much does access control cost per door?

Networked fob or card access typically costs £900–£1,800 per door in the UK, and cloud-managed access control £1,000–£2,000 per door plus a subscription. A standalone keypad or reader on a single door costs £450–£900. The price depends on lock type, door construction, cabling and integration with other systems.

Do cloud access control systems have monthly fees?

Usually, yes. Cloud-managed systems normally charge a subscription per door, per site or per user for software, remote management, mobile credentials and updates. Hardware and installation are typically quoted separately. Compare the total cost over several years with an on-premises system to see which works out better for your site.

Is a keypad cheaper than a fob system?

A standalone keypad is usually the cheapest option at £450–£900 for one door, because it needs no central controller or software. However, codes are easily shared and hard to manage when staff change. For more than one door or more than a handful of users, networked fob or mobile access usually gives better control.

Written and checked by the Access Control Installation team. Read our editorial policy.

Get a free access control installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote